Manual ignition speakers possible with matches if it is an old model. Before you turn on such a gas column Ariston, you must perform the following steps: Open the water tap connected to the appliance. Turn the main valve for fuel to the igniter. Light the match with matches. Turn on the regulator for gas supply.
27/10/16 - 00:58 #2. Set the thermostat to a temperature that will mean the heating should always be on, and make sure the boiler has acknowledged that, and then just control everything via the boiler. Without knowing makes and models it's hard to go into any details. David (2) Posts: 20,632.

If your boiler is losing pressure slowly and falls below 1 bar on the pressure gauge, then it will need to be topped up using the filling loop. To do this, follow this simple step-by-step: Turn the heating system off and allow it to cool. Slowly add water (which will also increase pressure) via the filling loop, by turning the screws or lever

The presence of an autonomous water heating system provides not only comfortable living, but also independence from the whims of utilities. The performance of such systems, their efficiency and safety depends on the technical characteristics of the Ariston boiler, the connection diagram and the quality of the installation.
Common Reasons Boilers Stop Working. There are many potential faults that could have caused your boiler to stop working. If you have a modern boiler, it is likely that your boiler will display a fault code when it goes into lockout. If you want to look up what a code means, then you should look through your boilers manual.
nB1YPiW. 786 328 810 945 923 882 641 341

how to turn on ariston boiler